260E | Hammond Manufacturing Transformers
260E | Hammond Manufacturing Transformers |
| 1+ |
£86.63 |
| 5+ |
£83.16 |
| 10+ |
£79.70 |
| 25+ |
£77.97 |
| 50+ |
£75.37 |
| 100+ |
£74.50 |
| 250+ |
£73.63 |
| 500+ |
£72.77 |
| 1000+ |
£72.34 |
| 2500+ |
£71.47 |
| In Stock |
Prices shown excludes VAT |
Purchase the 260E (260 Series - Hammond Manufacturing Transformers), from an authorised distributor. For more information or to buy the 260E, click me.
| Part No |
260E |
| Product Series |
260 Series |
| VA | 80 |
|---|
| A.C. High Voltage Secondary #1 RMS | 450V C.T. @ 115ma. |
|---|
| A.C. Filament Secondary #2 RMS | 5V @ 2A |
|---|
| A.C. Filament Secondary #3 RMS | 6.3V C.T. @ 3A |
|---|
| Dimension A | 76mm |
|---|
| Dimension B | 78mm |
|---|
| Dimension C | 64mm |
|---|
| Dimension D | 64mm |
|---|
| Dimension E | 61mm |
|---|
| Mounting Slot | 5mm x 10mm |
|---|
| RoHS Compliant |
Yes |
| REACH Compliant |
Yes |
| Share Me - 260E |
   |
260E | 260 Series | Hammond Manufacturing Transformers | KGA Enclosures Ltd
260 Series - Plate and Filament - 22 VA to 248 VA
Universal Primary and 50/60 Hz. Operation
- Universal primary with taps for 100, 120, 220, or 240 VAC, 50/60 Hz. (Except for the 260A6 which is 117V, 50/60 Hz. only).
- Designed for preamps, low power amps, general replacement, test equipment, etc.
- Economical, open frame, chassis mount - two hole (0.187 dia. = G) channel bracket, or four hole mounting.
- Units include a Faraday shield between the primary and secondary windings. The electrostatic shield reduces the capacitive coupling from the primary - greatly attenuating higher frequency current coupling to the secondaries.
- Minimum 5" long leads.
- These units are designed to run with BOTH primary windings energized for maximum efficiency.
- The Faraday shield lead - the grey wire - marked SH (shield), should remain grounded to the mounting bracket and in turn to the chassis.
- For more selection check out the 300 Series of universal plate and filament transformers.
