Hammond Manufacturing Electrical Enclosures | Operator Interface - Consolet Enclosures | 1472 Range

1472 Series Type 12 Modular Console Cabinet

Sloped Front

Product Application:

Designed to house electrical, electronic, hydraulic or pneumatic controls and instruments.
Heavy-duty construction provides protection from dirt, dust, oil and water. Sloping front control and instrument panels provides an ideal surface for mounting operator controls or instrumentation.
Interior mounting is provided for with a removable inner panel located on the rear of the basic console.

Base Console Construction:

Formed 14 gauge steel.
Smooth, continuously welded seams, without knockouts, cutouts or holes.
Sloped front instrument panel is continuously hinged on the front (bottom) edge and secured with captive panel screws, threaded into sealed wells.
Front instrument panel may be removed by pulling the hinge pin.
Flush doors are secured with a three point latch and operated with a key locking automotive type handle.
Two door model has overlapping front doors, with three point latch on right door.
Oil resistant gaskets are permanently secured.
Includes a removable inner panel formed from 12 gauge steel, mounted to the back of the enclosure interior.
Collar studs are provided for mounting inner panels.
A bonding stud is provided on the door and a grounding stud is provided in the enclosure for each door.
A literature pocket is provided.

Turret Construction:

Formed and welded from 14 gauge steel.
Sloping instrument panel and vertical rear access are completely removable.
Captive panel screws fasten into sealed wells.

Writing Surface Construction:

Formed and welded from 14 gauge steel.
Fastens to the front of the console with screws.

Product Finish:

Cover and enclosure are phosphatized and finished in ANSI 61 grey powder coating on the outside and on the inside.
Removable inner panels are finished in white powder coating.

Product Standards:

UL 508A Type 12.
CSA Type 12.
Complies with:
- NEMA Type 12
- IEC 60529, IP65

Product Resources:

View Product Data Sheet
View Customisation Options

Share This Product

Hammond Manufacturing Electrical Enclosures

KGA Enclosures Ltd are full authorised distributors of the Hammond Manufacturing Electrical Enclosures product range. This entire range is available from KGA Enclosures Ltd at great competitive pricing and with full customisation options on all applicable products.

To purchase any product or for more information on any product offered, simply call (+44) 01535 636856 or E-Mail: sales@kgaenclosures.com, where we will be happy to assist you.

View the Hammond Manufacturing Electrical Enclosures Range
View the Hammond Manufacturing Electrical Enclosures Price List

Or view the related product ranges from Hammond Manufacturing, which are all available from KGA Enclosures Ltd. Including the:

Hammond Manufacturing Enclosures Range
Hammond Manufacturing Power Distribution Range
Hammond Manufacturing Rack Systems Range
Hammond Manufacturing Transformers Range
Ritec Plastic Enclosures Range

What makes KGA Enclosures Ltd different from most other larger distributors is that we offer full customisation services on all enclosure and accessories (where applicable). All customisation work is undertaken by the relevant supplier, (some small projects are done utilizing outside contractors) at their own manufacturing facilities. These services include milling or punching of holes and slots into the enclosure or end plates for cables, connectors, switches etc. Printing and silk screening services allow for the addition of text, logos and graphics onto both the enclosure and end plates, to allow the end user to easily identify the product as well as giving the final product a more elegant finish. For more information on customisation services, please contact us.

1472 Series - Hammond Manufacturing Electrical Enclosures at KGA Enclosures Ltd

Product Options

Part No	Product Information	1+	10+	25+	More
Base Console
1472-24	Please Click Product Link For more Information	P.O.A.	P.O.A.	P.O.A.	More....
1472-36	Please Click Product Link For more Information	P.O.A.	P.O.A.	P.O.A.	More....
1472-48	Please Click Product Link For more Information	P.O.A.	P.O.A.	P.O.A.	More....
Turret
1472-24T	Please Click Product Link For more Information	P.O.A.	P.O.A.	P.O.A.	More....
1472-36T	Please Click Product Link For more Information	P.O.A.	P.O.A.	P.O.A.	More....
1472-48T	Please Click Product Link For more Information	P.O.A.	P.O.A.	P.O.A.	More....
Writing Surface
1472-24W	Please Click Product Link For more Information	P.O.A.	P.O.A.	P.O.A.	More....
1472-36W	Please Click Product Link For more Information	P.O.A.	P.O.A.	P.O.A.	More....
1472-48W	Please Click Product Link For more Information	P.O.A.	P.O.A.	P.O.A.	More....
For pricing and availability please contact us

Hammond Manufacturing - Customisation Services

Modified Electronic Enclosures

Almost every enclosure will need some kind of modification to be useful. In house modifications can be tedious, over complicated and a distraction from your main core business. A third party shop can add time and expense. Let us help you to deliver quality products made to your exact specifications.

Hammond Manufacturing Customisation Services

Why choose Hammond Manufacturing to modify your enclosure

Hammond Manufacturing offers a wide selection and massive inventory of enclosures ready to be modified.
Typically the minimum order quantity is 25 pieces. This can vary depending on product and service required. Please note KGA Enclosures does not add on any charges.
Hammond has an experience enclosure modification team and two dedicated modification facilities in North America and the United Kingdom. They are knowledgeable, available and capable.
Hammond Manufacturing helps eliminate scrap and design errors with approval drawings to confirm correct interpretation of your deign required. Many orders will also include a fast delivery of sample enclosures for your inspection. These steps ensure that your assembly fits perfectly before heading into the mass production stage.

Popular modification services offered:

Holes
Cutouts
Tapping and countersinking.
Pressed-in hardware (Studs, Standoffs)
Silk screening
UV Printing
Special colours
Special length extrusions
Pre-Installed accessories
Available services vary by product

Contact Us
+44 (0)1535 636856
sales@kgaenclosures.com
Return Home


VAT No: GB 204612745
Business No: 09341700