1598RABK | Hammond Manufacturing Enclosures
1598RABK | Hammond Manufacturing Enclosures |
1+ |
£24.09 |
10+ |
£22.16 |
25+ |
£21.68 |
50+ |
£20.95 |
100+ |
£20.71 |
250+ |
£20.47 |
500+ |
£20.23 |
1000+ |
£20.11 |
2500+ |
£19.87 |
In Stock |
Prices shown excludes VAT |
Purchase the 1598RABK (1598R Series - Hammond Manufacturing Enclosures), from an authorised distributor. For more information or to buy the 1598RABK, click me.
Part No |
1598RABK |
Product Series |
1598R Series |
Series | 1598R |
---|
Colour | Black |
---|
Material | Flame Retardant ABS Plastic |
---|
Length | 157mm |
---|
Width | 94mm |
---|
Height | 36mm |
---|
Shielded | EMI / RFI |
---|
IP Rating | IP54 |
---|
Flammability Rating | UL94 V-0 |
Max. P.C. Board Length | 80.67mm |
---|
Max. P.C. Board Width | 144.6mm |
Technical Drawings | pdf dxf stp 3d |
RoHS Compliant |
Yes |
REACH Compliant |
Yes |
Share Me - 1598RABK |
 |
1598RABK | 1598R Series | Hammond Manufacturing Enclosures | KGA Enclosures Ltd
1598R Series - ABS Plastic Instrument Enclosures
EMI/RFI Copper Conductive Coating Inside
- Desk top electronic instrument enclosure, ideally suited for mounting printed circuit boards.
- Moulded from flame retardant ABS plastic (material carries a UL flammability rating of 94V-0).
- Interior of each enclosure half is specially masked and sprayed with an RFI/EMI copper conductive coating.
- Coating manufacturer specifies an attenuation of more than 75 db from 1 Mhz. to 1 Ghz.
- Designed to meet IP54.
- Two sets of vertical 1.5mm (0.062") P.C. board guides are moulded into case halves front and rear.
- Front and rear panels are 1.6mm (0.064") brushed aluminium with protective paper on one side.
- Cases halves are secured with M3 x 0.5" x 10mm (0.39") Philips machine screws threaded into tapped integral brass bushings. Perfect for applications with repetitive assembly and disassembly are required.
- Integral horizontal P.C. card mounts on Eurocard centers.
- Stocked in matte textured black.
- Part number: 1598ATS100 - P.C. card standoffs moulded into top and bottom half of enclosure - require #6 x 1/4" (6.4mm) screws.