1554LA2GY | Hammond Manufacturing Enclosures
1554LA2GY | Hammond Manufacturing Enclosures |
| 1+ |
£17.66 |
| 10+ |
£16.25 |
| 25+ |
£15.89 |
| 50+ |
£15.36 |
| 100+ |
£15.19 |
| 250+ |
£15.01 |
| 500+ |
£14.83 |
| 1000+ |
£14.75 |
| 2500+ |
£14.57 |
| In Stock |
Prices shown excludes VAT |
Purchase the 1554LA2GY (1554 Series - Hammond Manufacturing Enclosures), from an authorised distributor. For more information or to buy the 1554LA2GY, click me.
| Part No |
1554LA2GY |
| Product Series |
1554 Series |
| Series | 1554 |
|---|
| Colour | Grey |
|---|
| Lid Colour | Grey |
|---|
| Material | Polycarbonate |
|---|
| Length | 105mm |
|---|
| Width | 105mm |
|---|
| Height | 90mm |
|---|
| Screw Lid Qty | 4 |
|---|
| IP Rating | IP68 |
|---|
| Flammability Rating | UL94-5VA |
|---|
| Max. P.C. Board Length | 92.57mm |
|---|
| Max. P.C. Board Width | 93mm |
|---|
| Technical Drawings | pdf dxf stp 3d |
|---|
| RoHS Compliant |
Yes |
| REACH Compliant |
Yes |
| Share Me - 1554LA2GY |
   |
1554LA2GY | 1554 Series | Hammond Manufacturing Enclosures | KGA Enclosures Ltd
1554 Series - Type 4X, 6P Polycarbonate and General Purpose ABS Enclosures
Screw Cover, Watertight, Flat Lid, UL Listed Options
- Ideally suited for mounting printed circuit boards or DIN rail mounted components.
- ABS versions are moulded from general purpose material which carries a flammability rating of UL94-HB. For indoor use.
- Polycarbonate versions are UV stabilized for outdoor use. Grey polycarbonate carries a UL94-5VA rating, while clear and smoked lids carry a UL94V-0 rating.
- Polycarbonate versions are cUL and UL 508A listed (File #E65324). ABS plastic versions are not UL listed.
- Enclosure colour is a light grey (RAL 7035).
- Gasketed lid with two piece "tongue and groove" construction provides protection against access of oil, dust, and water.
- Replaceable gasket is one piece made from high temperature, U.L. listed silicone. Supplied loose inside the enclosure (not pre-installed).
- Polycarbonate versions are designed to meet NEMA Type 4, 4X, 6, 6P, 12, and 13 ratings which meet and exceed IP ratings up to and including IP68. (Except 1554/55 V size which is 4, 4X only).
- ABS plastic versions are designed to meet IP66.
- Lid is secured with includes M4 stainless steel machine screws which are threaded into corrosion resistant bushings for repetitive assembly and disassembly. All hardware is designed to avoid corrosion caused by harsh environments over time.
- Lid screws are self captivating (lid holes are threaded with the first installation of lid screws).
- Internal features are maximized for mounting options and vary with size:
- Internal DIN rail mounting tabs moulded into most models, except sizes "C" and "D".
- Threaded (M3) integral brass inserts and/or standoffs (#6 self tapping screws) for P.C. board or inner panel mounting in all but the smallest size ("B").
- Vertical P.C. card guides (for 1.5mm thick P.C. boards) are moulded in all but the smallest size ("B").
