1418 FS Series | MSE - Freestanding Enclosures

Continuous Hinge Door With Handle
1418 FS Series Type 12 Mild Steel Two Door Freestanding Enclosures

Product Application
Designed to house electrical, electronic, hydraulic or pneumatic controls with provision for panel mounting or rack mounting of equipment. Provides a degree or protection from falling dirt, dust, oil and water. Available with front access only or both front and rear access. A variety of inner panels, rack mounting angles and swing frames are available to provide flexibility in equipment mounting.

Product Application

Designed to house electrical, electronic, hydraulic or pneumatic controls with provision for panel mounting or rack mounting of equipment.
Provides a degree or protection from falling dirt, dust, oil and water.
Available with front access only or both front and rear access.
A variety of inner panels, rack mounting angles and swing frames are available to provide flexibility in equipment mounting.

Product Construction
Formed 12 gauge steel (10 gauge on back of single access enclosures). Smooth, continuously welded seams without knockouts, cutouts or holes. Stiffeners on the rear of the enclosure provide rigidity. (Single access). Lifting eyes provide for easy enclosure handling. Doors are supported with heavy gauge continuous hinges. Doors are secured with a three point latch and operated with a key locking automotive type handle. Latch rods are equipped with rollers for easier door closing. Oil resistant gaskets are permanently secured. Provision for light kit mounting. Mounting channels are welded on the inside of the enclosure for mounting of optional inner panels or rack equipment rails. A bonding stud is provided on the door and a grounding stud is provided in the enclosure for each door. A literature pocket is provided for the inside of the door (Two pockets are provided for dual access units).

Product Construction

Formed 12 gauge steel (10 gauge on back of single access enclosures).
Smooth, continuously welded seams without knockouts, cutouts or holes.
Stiffeners on the rear of the enclosure provide rigidity. (Single access).
Lifting eyes provide for easy enclosure handling.
Doors are supported with heavy gauge continuous hinges.
Doors are secured with a three point latch and operated with a key locking automotive type handle.
Latch rods are equipped with rollers for easier door closing.
Oil resistant gaskets are permanently secured.
Provision for light kit mounting.
Mounting channels are welded on the inside of the enclosure for mounting of optional inner panels or rack equipment rails.
A bonding stud is provided on the door and a grounding stud is provided in the enclosure for each door.
A literature pocket is provided for the inside of the door (Two pockets are provided for dual access units).

Product Finish
Cover and enclosure are phosphatized and finished in recoatable smooth ANSI 61 grey powder coating. Optional inner panels, rails, frames and supports are available in white powder coating.

Product Standards
UL 508A Type 12. CSA Type 12. Complies with: NEMA Type 12 IEC 60529, IP54

Product Resources
View Product Data Sheet View Enclosure Customisation Options

Share On Social Media

Product Options

Part No	Colour	Height	Width	Depth	1+	10+	25+	More
Single Access
1418AW18	ANSI 61 Grey	1526mm	1221mm	459mm	P.O.A.	P.O.A.	P.O.A.	More....
1418BW20	ANSI 61 Grey	2288mm	1221mm	510mm	P.O.A.	P.O.A.	P.O.A.	More....
1418BY20	ANSI 61 Grey	2288mm	1830mm	510mm	P.O.A.	P.O.A.	P.O.A.	More....
1418BY24	ANSI 61 Grey	2288mm	1830mm	611mm	P.O.A.	P.O.A.	P.O.A.	More....
1418BY36	ANSI 61 Grey	2288mm	1830mm	916mm	P.O.A.	P.O.A.	P.O.A.	More....
1418ZW18	ANSI 61 Grey	1830mm	1221mm	459mm	P.O.A.	P.O.A.	P.O.A.	More....
1418ZW24	ANSI 61 Grey	1830mm	1221mm	611mm	P.O.A.	P.O.A.	P.O.A.	More....
1418ZX18	ANSI 61 Grey	1830mm	1526mm	459mm	P.O.A.	P.O.A.	P.O.A.	More....
1418ZX24	ANSI 61 Grey	1830mm	1526mm	611mm	P.O.A.	P.O.A.	P.O.A.	More....
1418ZX36	ANSI 61 Grey	1830mm	1526mm	916mm	P.O.A.	P.O.A.	P.O.A.	More....
1418ZY18	ANSI 61 Grey	1830mm	1830mm	459mm	P.O.A.	P.O.A.	P.O.A.	More....
1418ZY24	ANSI 61 Grey	1830mm	1830mm	611mm	P.O.A.	P.O.A.	P.O.A.	More....
Dual Access
1418BYD24	ANSI 61 Grey	2288mm	1830mm	611mm	P.O.A.	P.O.A.	P.O.A.	More....
1418ZWD24	ANSI 61 Grey	1830mm	1221mm	611mm	P.O.A.	P.O.A.	P.O.A.	More....
1418ZXD24	ANSI 61 Grey	1830mm	1526mm	611mm	P.O.A.	P.O.A.	P.O.A.	More....
1418ZXD36	ANSI 61 Grey	1830mm	1526mm	916mm	P.O.A.	P.O.A.	P.O.A.	More....
1418ZYD24	ANSI 61 Grey	1830mm	1830mm	611mm	P.O.A.	P.O.A.	P.O.A.	More....
Please visit individual product page for more detailed information

Product Accessories

Inner Panels

Part No	Product Information	1+	10+	25+	More
60AWFW	Please Click Link For More Detailed Information	P.O.A.	P.O.A.	P.O.A.	More....
72ZWFW	Please Click Link For More Detailed Information	P.O.A.	P.O.A.	P.O.A.	More....
72ZXFW	Please Click Link For More Detailed Information	P.O.A.	P.O.A.	P.O.A.	More....
72ZYFW	Please Click Link For More Detailed Information	P.O.A.	P.O.A.	P.O.A.	More....
90BWFW	Please Click Link For More Detailed Information	P.O.A.	P.O.A.	P.O.A.	More....
90BYFW	Please Click Link For More Detailed Information	P.O.A.	P.O.A.	P.O.A.	More....
Please refer to the product data sheet for product compatibility

Hammond Manufacturing - Customisation Services

Modified Electronic Enclosures
Almost every enclosure will need some kind of modification to be useful. In house modifications can be tedious, over complicated and a distraction from your main core business. A third party shop can add time and expense. Let us help you to deliver quality products made to your exact specifications.

Why choose Hammond Manufacturing to modify your enclosure
Hammond Manufacturing offers a wide selection and massive inventory of enclosures ready to be modified. Typically the minimum order quantity is 25 pieces. This can vary depending on product and service required. Please note KGA Enclosures does not add on any charges. Hammond has an experience enclosure modification team and two dedicated modification facilities in North America and the United Kingdom. They are knowledgeable, available and capable. Hammond Manufacturing helps eliminate scrap and design errors with approval drawings to confirm correct interpretation of your deign required. Many orders will also include a fast delivery of sample enclosures for your inspection. These steps ensure that your assembly fits perfectly before heading into the mass production stage.

Why choose Hammond Manufacturing to modify your enclosure

Hammond Manufacturing offers a wide selection and massive inventory of enclosures ready to be modified.
Typically the minimum order quantity is 25 pieces. This can vary depending on product and service required. Please note KGA Enclosures does not add on any charges.
Hammond has an experience enclosure modification team and two dedicated modification facilities in North America and the United Kingdom. They are knowledgeable, available and capable.
Hammond Manufacturing helps eliminate scrap and design errors with approval drawings to confirm correct interpretation of your deign required. Many orders will also include a fast delivery of sample enclosures for your inspection. These steps ensure that your assembly fits perfectly before heading into the mass production stage.

Popular modification services offered:
Holes Cutouts Tapping and countersinking. Pressed-in hardware (Studs, Standoffs) Silk screening UV Printing Special colours Special length extrusions Pre-Installed accessories Available services vary by product

KGA Enclosures | 1418 FS Series | MSE - Freestanding Enclosures | Hammond Manufacturing


VAT No: GB 204612745
Business No: 09341700