178-240-289-298MG Series | Hammond Manufacturing Transformers

cULus and CSA Listed
178-240-289-298 "MG" Series Medical Grade Plug-In Line Isolation Transformers

Product Features
Intended for non-patient connected indoor application where protection of sensitive electronics is required: High end audio / studio use Medical electronics High end test equipment / laboratory cULus listed to UL 60601-1 (1st Edition) and CAN/CSA-C22.2 No. 601.1-M90 (R2005). Each unit provides complete line isolation and noise filtering plus utilizes a Faraday shield to reduce leakage currents below UL60601-1 requirements (under 100 microamps). Reduced noise coupling due to floating AC output. Not intended to be used to supply power to life support appliances. 3 Different VA capacities available - - 500VA, 1000VA and 1800VA. All rated 50 / 60 Hz. 4 Different electrical configurations: 120V - 120V Straight isolation ("178" Series) 240V - 240V Straight isolation ("240" Series) 240V - 120V Step down isolation ("289" Series) 120V - 240V Step up isolation ("298" Series) Vented 14 gauge steel housing with white powder paint. Hospital Grade 3-wire grounded Input Plug. 2 or 3 Duplex Hospital Grade Output Receptacles. On-Off Switch / Circuit Breaker combo protected, and built in automatic Thermal Cut Out for added protection.

Product Features

Intended for non-patient connected indoor application where protection of sensitive electronics is required:

High end audio / studio use
Medical electronics
High end test equipment / laboratory

cULus listed to UL 60601-1 (1st Edition) and CAN/CSA-C22.2 No. 601.1-M90 (R2005).
Each unit provides complete line isolation and noise filtering plus utilizes a Faraday shield to reduce leakage currents below UL60601-1 requirements (under 100 microamps).
Reduced noise coupling due to floating AC output.
Not intended to be used to supply power to life support appliances.
3 Different VA capacities available - - 500VA, 1000VA and 1800VA. All rated 50 / 60 Hz.
4 Different electrical configurations:

120V - 120V Straight isolation ("178" Series)
240V - 240V Straight isolation ("240" Series)
240V - 120V Step down isolation ("289" Series)
120V - 240V Step up isolation ("298" Series)

Vented 14 gauge steel housing with white powder paint.
Hospital Grade 3-wire grounded Input Plug.
2 or 3 Duplex Hospital Grade Output Receptacles.
On-Off Switch / Circuit Breaker combo protected, and built in automatic Thermal Cut Out for added protection.

Product Resources
View Product Data Sheet

Share On Social Media

Hammond Manufacturing Transformers
KGA Enclosures Ltd are fully authorised distributors of the entire Hammond Manufacturing Transformers product range. All Hammond Manufacturing products are available from KGA Enclosures at great competitive prices. View the Hammond Transformers Range View the Hammond Transformers Price List Or view the related product ranges from Hammond Manufacturing View the Hammond Enclosures Range View the Hammond Electrical Enclosures Range View the Hammond Rack Systems Range View the Ritec Plastic Enclosures Range For more information on any product available from KGA Enclosures Ltd simply email sales@kgaenclosures.com or call 01535 636856 (Outside UK: +44 1535 636856).

Hammond Manufacturing Transformers

KGA Enclosures Ltd are fully authorised distributors of the entire Hammond Manufacturing Transformers product range. All Hammond Manufacturing products are available from KGA Enclosures at great competitive prices.

View the Hammond Transformers Range
View the Hammond Transformers Price List

Or view the related product ranges from Hammond Manufacturing

View the Hammond Enclosures Range
View the Hammond Electrical Enclosures Range
View the Hammond Rack Systems Range
View the Ritec Plastic Enclosures Range

For more information on any product available from KGA Enclosures Ltd simply email sales@kgaenclosures.com or call 01535 636856 (Outside UK: +44 1535 636856).

178-240-289-298MG Series - Hammond Manufacturing Transformers

Product Options

Part No	VA	Input Voltage	Input Current	Output Voltage	1+	10+	25+	More
Straight Isolation (120 VAC to 120 VAC)
178MG1000	1000	120 VAC	8.67 A	120 VAC	£407.49	£374.89	£366.74	More....
178MG1800	1800	120 VAC	15.63 A	120 VAC	£638.42	£587.35	£574.58	More....
178MG500	500	120 VAC	4.33 A	120 VAC	£292.03	£268.67	£262.83	More....
Straight Isolation (240 VAC to 240 VAC)
240MG1000	1000	240 VAC	4.33 A	240 VAC	£407.49	£374.89	£366.74	More....
240MG1800	1800	240 VAC	7.81 A	240 VAC	£638.42	£587.35	£574.58	More....
240MG500	500	240 VAC	2.17 A	240 VAC	£292.03	£268.67	£262.83	More....
Step-Down Isolation (240 VAC to 120 VAC)
289MG1000	1000	240 VAC	4.33 A	120 VAC	£407.49	£374.89	£366.74	More....
289MG1800	1800	240 VAC	7.81 A	120 VAC	£638.42	£587.35	£574.58	More....
289MG500	500	240 VAC	2.17 A	120 VAC	£292.03	£268.67	£262.83	More....
Step-Up Isolation (120 VAC to 240 VAC)
298MG1000	1000	120 VAC	8.67 A	240 VAC	£407.49	£374.89	£366.74	More....
298MG1800	1800	120 VAC	15.63 A	240 VAC	£638.42	£587.35	£574.58	More....
298MG500	500	120 VAC	4.33 A	240 VAC	£292.03	£268.67	£262.83	More....
Please visit individual product page for more detailed information

Hammond Manufacturing - Customisation Services

Modified Electronic Enclosures
Almost every enclosure will need some kind of modification to be useful. In house modifications can be tedious, over complicated and a distraction from your main core business. A third party shop can add time and expense. Let us help you to deliver quality products made to your exact specifications.

Why choose Hammond Manufacturing to modify your enclosure
Hammond Manufacturing offers a wide selection and massive inventory of enclosures ready to be modified. Typically the minimum order quantity is 25 pieces. This can vary depending on product and service required. Please note KGA Enclosures does not add on any charges. Hammond has an experience enclosure modification team and two dedicated modification facilities in North America and the United Kingdom. They are knowledgeable, available and capable. Hammond Manufacturing helps eliminate scrap and design errors with approval drawings to confirm correct interpretation of your deign required. Many orders will also include a fast delivery of sample enclosures for your inspection. These steps ensure that your assembly fits perfectly before heading into the mass production stage.

Why choose Hammond Manufacturing to modify your enclosure

Hammond Manufacturing offers a wide selection and massive inventory of enclosures ready to be modified.
Typically the minimum order quantity is 25 pieces. This can vary depending on product and service required. Please note KGA Enclosures does not add on any charges.
Hammond has an experience enclosure modification team and two dedicated modification facilities in North America and the United Kingdom. They are knowledgeable, available and capable.
Hammond Manufacturing helps eliminate scrap and design errors with approval drawings to confirm correct interpretation of your deign required. Many orders will also include a fast delivery of sample enclosures for your inspection. These steps ensure that your assembly fits perfectly before heading into the mass production stage.

Popular modification services offered:
Holes Cutouts Tapping and countersinking. Pressed-in hardware (Studs, Standoffs) Silk screening UV Printing Special colours Special length extrusions Pre-Installed accessories Available services vary by product

KGA Enclosures | 178-240-289-298MG Series | Hammond Manufacturing Transformers

The 178-240-289-298 "MG" Series Medical Grade Plug-In Line Isolation Transformers From Hammond Manufacturing Transformers are available from KGA Enclosures Ltd.

KGA Enclosures Ltd

Great Brands - Great Prices

World Wide Shipping on all Products

Credit Cards / PayPal Accepted

Contact Us
+44 (0)1535 636856
sales@kgaenclosures.com
Return Home


VAT No: GB 204612745
Business No: 09341700